4 Ways to Overcome Leaking Gas Cylinders, Remember Don’t Panic

by

JAKARTA – Gas cylinder hiss or leaks are common at home. This condition often makes you confused and makes you panic because you don’t know how to deal with it.

There are many easy ways to deal with leaking or hissing gas cylinders. But the main thing you need to know is that you don’t need to panic when you face the problem of hissing gas cylinders.

Here are some ways to deal with hissing or leaking gas cylinders, quoted from Solopos.com, Monday (27/9/2021).

1. Avoid Electrical Contact and Fire

The first thing that needs to be done is to keep all electrical contacts around the gas or in the kitchen room. You are even forbidden to turn on the lights even if they are needed for lighting. This is because the electric current can interact with the gas jets that start the fire.

Also Read: 5 Plants That Make Your Home Cozy and Colorful

In addition, this leak is also very sensitive to all things related to fire. For example matches, cigarette sparks, coals or other objects. So as soon as possible to keep away any hazardous materials and prone to fire.

2. Give Additional Rubber Seals to Gas Cylinders

The hissing sound that comes from the gas cylinder can be overcome with the help of additional rubber seals. This indicates the possibility that the condition of the safety part has been damaged, so it cannot lock optimally.

The replacement technique can be done in the following way:

a. Remove the regulator part from the gas cylinder

b. Prepare a new rubber seal that is still good

c. Then also prepare the necessary tools for the replacement process such as tweezers and scissors

d. Then remove the old rubber seal that was originally installed

e. Cut the new seal about part

Also Read: 7 Types of Floors and Their Benefits

f. After that insert it into the tube hole

g. Add it with the old rubber seal

h. Reinstall the regulator correctly and tightly

i. Make sure there is no more hissing sound

3. Adding duct tape to the gas cylinder seal

The next way to deal with hissing or leaking gas cylinders is to add duct tape to the gas cylinder seal rubber. It is also effective at reducing leaks and stopping the hissing sound.

This method also minimizes the risk of fire or explosion. This is how it can be done.

a. Immediately remove the regulator from the gas cylinder

b. Then remove the rubber seal that was originally used

c. Prepare elastic duct tape or duct tape and scissors

d. Then wrap the duct tape 2 or 3 times

e. Then trim it to the same length as the rubber seal

f. Insert the rubber seal with duct tape into the mouth of the gas cylinder

g. Reattach the regulator to the gas cylinder tightly

h. Make sure there is no more hissing sound

i. Try to turn on the stove

4. Soaking the Rubber Seal in Water

The next way to deal with a hissing or leaking gas cylinder is to soak the rubber seal in water. This solution was considered because of the possibility that the part was too dry and lacked elasticity so that it could not lock the gas cylinder tightly.

Here’s the right way to do to bury the rubber seal.

a. Remove the regulator part from the gas cylinder

b. Then remove the rubber seal using tweezers

c. Then soak in water for 5 to 10 seconds

d. Take a rubber seal and wipe sufficiently

e. Then put it back in the mouth of the gas cylinder hole

f. Next, install the regulator tightly

g. Make sure there is no more hissing sound from the gas cylinder

h. Then try to turn on the stove

i. Position the gas cylinder slightly away from the stove before turning it on

Leave a Comment